First, solar street light panel
Solar panels are fragile products. Customers should not place heavy objects on them during installation. When installing solar panels, we must clear the outlets behind the solar panels. They are generally divided into positive and negative poles (red and black negative, all in color). To distinguish), the wiring needs to pay attention to stripping the sheath wire, and the multi-strand copper wire used by the solar street lamp needs to be tightened when we use it. If it is improperly handled, it will cause a short circuit and burn out the diode.
Second, solar street light battery
When the colloidal battery for solar street lamps is fully charged during use, when we are stripping and installing, we should first wrap one of them separately so that the two positive and negative electrodes are not exposed to fire due to improper handling. In addition, you need to pay attention to the difference between positive and negative when installing, you can not connect wrong. (The difference between positive and negative poles is very important in the installation of solar street lights)
Third, solar street light source
Most of the light source adopts led products, and the surface is tempered glass. It is also the light-emitting port. We need to pay attention to the cleanliness of the surface. When installing the wiring, the lamp head will export two lines to facilitate the installation of the staff. The wiring method varies according to the style of the lamp, but the positive and negative It is the same. When using a tape, you should use your hand to gently pull it to prevent it from falling off.
